Call ✆ +91 9809802016 | 9891320678
Micro Perforated Metal Ceiling Tiles for Noise Control
Bottom line: Micro Perforated Metal Ceiling tiles reduce echo by letting sound pass through tiny holes into an acoustic backing. Typical performance is NRC 0.70 to 0.90, depending on fleece and infill. They suit architects, interior designers, facility managers and contractors specifying commercial metal ceilings for offices, schools, restaurants, auditoriums and hospitality spaces.
What Are Micro Perforated Metal Ceiling Tiles?
Micro perforated metal ceiling tiles are aluminium or galvanised steel panels with very small holes, often under 1 mm. Sound enters the holes and loses energy in the acoustic backing or air cavity behind. At 0.50 mm, the holes are nearly invisible from normal viewing distance, so the metal finish stays intact while acoustics improve. That makes them a strong choice among perforated metal ceilings and architectural metal ceilings where appearance matters as much as sound.
How Do Micro Perforated Ceiling Tiles Reduce Noise?
They absorb sound instead of reflecting it. Perforations admit sound waves, and the fleece and infill convert that energy to heat. Solid metal ceiling tiles reflect sound. A micro perforated ceiling absorbs it.
Independent testing at an NVLAP-accredited laboratory recorded an NRC of 0.80 with a thin acoustic fleece, and 0.90 when fiberglass infill was added. Results depend on perforation depth, open area, backing and cavity depth, so always request a project-specific test report.
Reverberation Control at a Glance
Ceiling
Result
Solid metal
Echo lingers
Micro perforated
Clearer speech
With fleece backing
NRC 0.80
Features :-
Our Perforated Metal Ceiling Have
0.7/NRC Value
- High sound absorption
- Lightweight
- Non-combustible
- Environmentally friendly
Specification
Benefits
Applications
Installation Process
Specification
Technical Specifications
Parameter
Typical Specification
Material
Aluminium or galvanised steel
Sheet thickness
0.5 to 0.8 mm
Perforation diameter
0.5 to 1.0 mm
Acoustic backing
Non-woven fleece, optional mineral or glass wool infill
NRC range
0.70 to 0.90 (tested per ISO 354 / ASTM C423)
Tile sizes
600 x 600 mm, 600 x 1200 mm, custom sizes
Finish
Powder coat in standard and custom colours
Grid compatibility
Standard 24 mm T-grid, concealed and clip-in systems
Benefits
Key Benefits
Benefit
Detail
Noise Control
Reduces echo and reverberation
Clean Look
Near-invisible holes on a monolithic surface
Durability
Resists dents, moisture and ageing
Fire Safety
Non-combustible metal face
Hygiene
Wipeable, non-fibrous finish
Sustainability
Fully recyclable metal
Design Freedom
Custom colours and perforation patterns
Applications
Applications by Space
Space
Use
Offices
Open plan and meeting rooms
Auditoriums
Speech clarity and echo control
Schools
Classrooms and lecture halls
Restaurants
Lower dining noise
Hotels
Lobbies and corridors
Hospitals
Wipeable, low-particle ceilings
Airports
Large-volume terminals
Installation Process
Installation Process
01
Survey the site and confirm cavity depth
02
Finalise pattern, backing and reflected ceiling plan
03
Install the suspension grid and level it
04
Fix acoustic infill above the tiles
05
Lay in or clip on the tiles
06
Cut around services using factory-cut openings
07
Clean with a soft cloth and inspect alignment
Micro Perforated Metal Ceiling Tiles FAQs
1. What is the NRC of micro perforated metal ceiling tiles?
Typically NRC 0.70 to 0.90, depending on backing, perforation and cavity depth.
2. Do perforated metal ceilings really reduce noise?
Yes. Holes let sound into absorbent backing instead of reflecting it into the room.
3. Are micro perforated ceiling tiles better than solid metal?
For acoustics, yes. Solid metal reflects sound, while perforated tiles absorb it.
4. What hole size counts as micro perforation?
Generally under 1 mm, commonly 0.5 mm to 1.0 mm.
5. Can I paint micro perforated metal ceiling tiles?
Avoid it. Paint can block holes and lower absorption. Order factory colours instead.
6. Do these tiles fit standard T-grid systems?
Most lay-in types fit standard 24 mm T-grid. Confirm edge detail before ordering.
7. Are perforated metal ceiling tiles fire safe?
Metal faces are non-combustible. Confirm fire rating of the backing with test reports.
8. Can I get custom perforation patterns?
Yes. Custom hole size, pitch, shape and colour are available for project requirements.
9. Do they work on walls too?
Yes. Matching perforated wall panels and metal wall panels are available.
10. Are they suitable for humid areas?
Aluminium and coated steel tolerate humidity better than gypsum or mineral fibre tiles.
Project Has been Delivered
0
+
Postive Feedback
0
%